Skip to main content Skip to page footer
sitepackage sitepackage

Platform

What are some essential ingredients for a successful harvest? Here are three levels you must score on: Performance, uptime, and cost of operation. To get there, use only John Deere certified parts and inspect key wear parts regularly.

OPTIMISE THE FLOW

Tapered auger flight extensions can help you mitigate uneven material flow into the feederhouse. A smooth, even flow is essential for optimal machine performance. 

600R + 600X and 700X Series cutting platforms 

BXE10080

  • Crop lifters ensure that laying crops are effectively picked up and increase the performance in down-crop situations. Intact crop lifters prevent damage to the cutterbar.
  • Replace the crop lifters once they are bent or damaged.
  • Original John Deere crop lifters are easily installed on the knife guards and can be adjusted in three positions to ensure the right angle for a reliable crop flow without the risk of damages.

 

DESCRIPTION SERIESPART NUMBERPRICE*
Crop lifter600R, 700PF, 600X, 700XAXE96494AXE96494
Watchlist

AXE37174
H229537 (LSL) & H229538 (SLS)
MCXFA1961
  • Properly serviced knife guards mean lower power needs, which reduces fuel consumption and translates into increased belt life.
  • Replace knife guards when they are broken, bent or if the gap exceeds 5.4 mm. Use our multitool MCXFA1961 to measure the degree of wear in seconds.
  • Original John Deere knife guards feature superior wear characteristics due to the special surface treatment we apply.

DESCRIPTION SERIESPART NUMBERPRICE*
Welded knife guard600R, 600X, 700X, 700PFAXE37174AXE37174
Watchlist
MultitoolAll SeriesMCXFA1961MCXFA1961
Watchlist

DESCRIPTION SERIESPART NUMBERPRICE*
Long point knife guard
(Long-short-long) - for small grain
(cereals, oil-seed rape)
 		600D, 700D, RDFH229539 H229539
Watchlist
Long point knife guard
(Short-long-short) - for small grain
(cereals, oil-seed rape)		600D, 700D, RDFH229540H229540
Watchlist
Blunt point knife guard
(Long-short-long) - for varying crops
(soy beans)		600F, 600FD, 700FD, RDFH229537H229537
Watchlist
Blunt point knife guard
(Short-long-short) - for varying crops
(soy beans)		600F, 600FD, 700FD, RDFH229538H229538
Watchlist

  • Did you know that up to 80 percent of crop loss can occur at the combine header? In your knife section, smooth precision is absolutely essential for an effective cut – and will save you fuel.
  • Replace knife sections when they are broken, bent or when serrations are rounded and no longer grab the crop or when teeth are missing or the tip is worn to a point. 
  • Original John Deere knife sections are made using the latest computer controlled hardening processes to deliver longer, more efficient cutting. They’ll always fit the first time for fast, downtime reducing changeover.

 DESCRIPTIONSERIESPART NUMBERPRICE*

 

3-Inch coarse serrated knife section
(for dry conditions in small grain and
coarse grain (e.g. soybeans))		600R, 600X, 700X, 700PFZ93077Z93077
Watchlist

 

3-Inch fine serrated knife section
(for varying conditions (green straw and
weedy) in small grain, or varying crops
(grass and linseed))		600R, 600X, 700X, 700PFZ93078Z93078
Watchlist

 

 DESCRIPTIONSERIESPART NUMBERPRICE*
4-Inch – coarse section
(for dry conditions in small grain and
coarse grain (e.g. soybeans))		600D, 700D, 600FD, 700FD, RDFH163131H163131
Watchlist
4-Inch – coarse overlap section
(for dry conditions in small grain and
coarse grain (e.g. soybeans))		600D, 700D, 600FD, 700FD, RDFH226352H226352
Watchlist
4-Inch – fine section
(for varying conditions (green straw and
weedy) in small grain, or varying crops
(grass and linseed))		600D, 700D, 600FD, 700FD, RDFH153329H153329
Watchlist
4-Inch – fine overlap section
(for varying conditions (green straw and
weedy) in small grain, or varying crops
(grass and linseed))		600D, 700D, 600FD, 700FD, RDFH226351H226351
Watchlist

 

KXE10308
  • Save time and money by purchasing a complete cutterbar kit instead of replacing individual parts.
DESCRIPTIONMODELPART NUMBERPRICE*
Fine serrated622X, 722XKXE10463KXE10463
Watchlist
Fine serrated625X, 725XKXE10464KXE10464
Watchlist
Fine serrated630X, 730XKXE10465KXE10465
Watchlist
Fine serrated635X, 735XKXE10466KXE10466
Watchlist
Fine serrated640X, 740XKXE10467KXE10467
Watchlist
Coarse serrated622X, 722XKXE10306KXE10306
Watchlist
Coarse serrated625X, 725XKXE10308KXE10308
Watchlist
Coarse serrated630X, 730XKXE10309KXE10309
Watchlist
Coarse serrated635X, 735XKXE10310KXE10310
Watchlist
Coarse serrated640X, 740XKXE10311KXE10311
Watchlist

DESCRIPTIONMODELPART NUMBERPRICE*
Head segment616R-630RAH168890AH168890
Watchlist
Head segment635RAXE19894AXE19894
Watchlist
Middle segment616R-635RAH168892AH168892
Watchlist
Coupler616R-635RAH168906AH168906
Watchlist
End segment616RAH221747AH221747
Watchlist
End segment618RAH168896AH168896
Watchlist
End segment620RAH168898AH168898
Watchlist
End segment622RAH168900AH168900
Watchlist
End segment625RAH168902AH168902
Watchlist
End segment630RAH168900AH168900
Watchlist
End segment635RAXE20195AXE20195
Watchlist

  • Finger retainers reduce the risk of internal auger damage and unnecessary repair costs by preventing broken fingers from entering the combine.
  • Intact auger fingers improve feeding and enable higher harvesting speeds.
  • Original John Deere Auger Fingers feature zone hardening and high elasticity so that they can withstand heavier stress levels without deforming or breaking.
 DESCRIPTIONSERIESPART NUMBERPRICE*
Kit of 10 steel auger fingers,
retainer and pins		600R, 600F, 600X, 700XAH214868AH214868
Watchlist
Finger cap600R, 600F, 600X, 700XH168206H168206
Watchlist
Finger bearing600R, 600F, 600X, 700XAH171602AH171602
Watchlist
Finger600R, 600F, 600X, 700XH169914H169914
Watchlist

 DESCRIPTIONSERIESPART NUMBERPRICE*
 Kit of 10 Steel Auger Fingers600D, 700D, 600FD, 700FD, RDFAXE21246AXE21246
Watchlist
Finger Set (1x Finger,1x Spring Locking Pin,1x Retainer)600D, 700D, 600FD, 700FD, RDFAH228229AH228229
Watchlist

  • Composite tines are the perfect choice for maximum performance in down and short crops as they facilitate better crop reach and more active movement.
  • Replacing missing or bent tines ensures a reliable material feed and prevents interference with other components.
  • Original John Deere reel tines feature the tightest tolerances to prevent interference while facilitating the highest feeding performance.
DESCRIPTIONSERIESPART NUMBERPRICE*
Steel Tine600F, 600R, 600X, 700XZ102299Z102299
Watchlist
Plastic Tine (Set of 10) (For reel without bats)600X, 700X, 700PF, 600D, 700D, 600FD, 700FD, RDFKXE10423KXE10423
Watchlist
Plastic Tine (Set of 60) (For reel without bats)600X, 700X, 700PF, 600D, 700D, 600FD, 700FD, RDFKXE10424KXE10424
Watchlist
Plastic Tine, Full bat, (set of 10)600F, 600D, 700D, 600FDAH166489AH166489
Watchlist
Plastic Tine, Full bat, (set of 130)600F, 600D, 700D, 600FDAH166493AH166493
Watchlist
Plastic Tine, RH bat, (set of 10)600F, 600D, 700D, 600FDAH166490AH166490
Watchlist
Plastic Tine, LH bat (set of 10)600F, 600D, 700D, 600FDAH166491AH166491
Watchlist
Plastic Tine, no bat (set of 10)600F, 600D, 700D, 600FDKXE10477KXE10477
Watchlist