Skip to main content Skip to page footer
sitepackage sitepackage

Headers & Platforms

Looking for improvements on your combine header? Check out our most valuable and high quality products to enhance your harvesting experience.

 

Knives & Cutterbar Kits

Reduce fuel consumption, wear and most importantly losses on your combine with a sharp set of knives. You can choose between a wide portfolio of knive specifactions and between single sections, segments or cutterbar kits.

 

3 Inch Coarse Section 600R, 700PF, 600X, 700X Z93077 Z93077 incl. VAT*

3 Inch Coarse Section

Part-No.: Z93077 Model: 600R, 700PF, 600X, 700X

Recommended for coarse grain (e.g. soybeans).

System
3 Inch Teeth per edge
19
3 Inch Fine Section 600R, 700PF, 600X, 700X Z93078 Z93078 incl. VAT*

3 Inch Fine Section

Part-No.: Z93078 Model: 600R, 700PF, 600X, 700X

Recommended for small grain or varying crops while harvesting in different, green or weedy conditions.

System
3 Inch Teeth per edge
25
Expert Tip

Which knife for which condition?

We recommend coarse serrated knives for small an coarse grain in dry conditions. In varying, weedy conditions and for carying crops we recommend fine serrated knives.

4 Inch Coarse Section 600F/FD, 700FD, RDF, HDX, HDF, HDR H163131 H163131 incl. VAT*

4 Inch Coarse Section

Part-No.: H163131 Model: 600F/FD, 700FD, RDF, HDX, HDF, HDR

Recommended for coarse grain (e.g. soybeans).

System
4 Inch Teeth per inch
7
4 Inch Coarse Overlap Section 600F/FD, 700FD, RDF, HDX, HDF, HDR H226352 H226352 incl. VAT*

4 Inch Coarse Overlap Section

Part-No.: H226352 Model: 600F/FD, 700FD, RDF, HDX, HDF, HDR

Recommended for coarse grain (e.g. soybeans).

System
4 Inch Teeth per inch
7 Overlap Sections
Needed depending on assembly place. Refer to your dealer when replacing.
4 Inch Fine Section 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H153329 H153329 incl. VAT*

4 Inch Fine Section

Part-No.: H153329 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Recommended for small grain or varying crops while harvesting in different, green or weedy conditions.

System
4 Inch Teeth per inch
14
4 Inch Fine Overlap Section 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H226351 H226351 incl. VAT*

4 Inch Fine Overlap Section

Part-No.: H226351 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Recommended for small grain or varying crops while harvesting in different, green or weedy conditions.

System
4 Inch Teeth per inch
14 Overlap Sections
Needed depending on assembly place. Refer to your dealer when replacing.
600X Complete Cutterbar Kit - Coarse 622X KXE10306 KXE10306 incl. VAT*

600X Complete Cutterbar Kit - Coarse

Part-No.: KXE10306 Model: 622X

Recommended for coarse grain (e.g. soybeans).

Also available for all other 600X platforms:

 

625X
KXE10308 630X
KXE10309 635X
KXE10310 640X
KXE10311 System
3 Inch
600X Complete Cutterbar Kit - Fine 622X KXE10463 KXE10463 incl. VAT*

600X Complete Cutterbar Kit - Fine

Part-No.: KXE10463 Model: 622X

Recommended for small grain or varying crops in different, green or weedy conditions.

Also available for all 600X:

625X
KXE10464 630X
KXE10465 635X
KXE10466 640X
KXE10467 System
3 Inch
600R Complete Cutterbar Kit - Coarse 618R KXE10908 KXE10908 incl. VAT*

600R Complete Cutterbar Kit - Coarse

Part-No.: KXE10908 Model: 618R

Recommended for coarse grain (e.g. soybeans).

Also available for all other 600R platforms:

 

620R
KXE10909 622R
KXE10910 625R
KXE10911 630R
KXE10912 System
3 Inch

Your header is not mentioned?

Contact your dealer for support in your search for the correct part and configuration

Expert Tip

Save money with cutterbar segments

Complete Kit not needed? Only one segment of the cutterbar is damaged? Save money ordering only the needed segments instead of a complete kit. Contact your dealer to inform yourself about the right cutterbar segment fitting your machine.

 

Knife Guards

Reduce power and fuel needs,and increase cutting quality and belt life with properly serviced original John Deere knife guards, featuring superior wear characteristics due to the special surface treatment we apply.

 

Knive Guard (Auger Platform) 600R, 600X, 700X, 600PF, 700PF AXE37174 AXE37174 incl. VAT*

Knive Guard (Auger Platform)

Part-No.: AXE37174 Model: 600R, 600X, 700X, 600PF, 700PF

Dual Edge with highest cutting performance with 30% less weight compared to forged guards. No hold-down clips needed.

System
3 Inch
High Wear Guard (Long Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H229539 H229539 incl. VAT*

High Wear Guard (Long Point, Draper)

Part-No.: H229539 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Long Point recommended for use in down crop situations and crops like cerelas and oils seed.

System
4 Inch Layout
Long-Short-Long layout, need alternating assembly with Short-Long-Short.
Expert Tip

Standard or high wear guards?

The black standard guards are a solid option, but the green high wear guards are always preferable. With additional hardening they're perfect for abbrasive soil, offering a longer lifetime.

High Wear Guard (Long Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H229540 H229540 incl. VAT*

High Wear Guard (Long Point, Draper)

Part-No.: H229540 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Long Point recommended for use in down crop situations and crops like cerelas and oils seed.

System
4 Inch Layout
Short-Long-Short layout, need alternating assembly with Long-Short-Long
High Wear Guard (Blunt Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H229537 H229537 incl. VAT*

High Wear Guard (Blunt Point, Draper)

Part-No.: H229537 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Blunt Point for use in various crop, incl. ground-level crops like soybeans. Supporting lowest stubble height.

System
4 Inch Layout
Long-Short-Long layout, need alternating assembly with Short-Long-Short.
High Wear Guard (Blunt Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H229538 H229538 incl. VAT*

High Wear Guard (Blunt Point, Draper)

Part-No.: H229538 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Blunt Point for use in various crop, incl. ground-level crops like soybeans. Supporting lowest stubble height.

System
4 Inch Layout
Short-Long-Short layout, need alternating assembly with Long-Short-Long
Standart Wear Guard (Long Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H213405 H213405 incl. VAT*

Standart Wear Guard (Long Point, Draper)

Part-No.: H213405 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Long Point recommended for use in down crop situations and crops like cerelas and oils seed.

System
4 Inch Layout
Long-Short-Long layout, need alternating assembly with Short-Long-Short.
Standart Wear Guard (Long Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H213508 H213508 incl. VAT*

Standart Wear Guard (Long Point, Draper)

Part-No.: H213508 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Long Point recommended for use in down crop situations and crops like cerelas and oils seed.

System
4 Inch Layout
Short-Long-Short layout, need alternating assembly with Long-Short-Long
Standart Wear Guard (Blunt Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H213398 H213398 incl. VAT*

Standart Wear Guard (Blunt Point, Draper)

Part-No.: H213398 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Blunt Point for use in various crop, incl. ground-level crops like soybeans. Supporting lowest stubble height.

System
4 Inch Layout
Long-Short-Long layout, need alternating assembly with Short-Long-Short.
Standart Wear Guard (Blunt Point, Draper) 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR H213507 H213507 incl. VAT*

Standart Wear Guard (Blunt Point, Draper)

Part-No.: H213507 Model: 600D/F/FD, 700D/FD, 900D, RDF, HDX, HDF, HDR

Blunt Point for use in various crop, incl. ground-level crops like soybeans. Supporting lowest stubble height.

System
4 Inch Layout
Short-Long-Short layout, need alternating assembly with Long-Short-Long

Need more information?

For other needed parts and configuration details check out our maintenance guide or ask your dealer!

Explore now
Expert Tip

Why to replace a knife guard?

Replacing a knife but not a guard is like sharpening just one side of your scissors. The knife guard is critical for the cutting quality of the platform. A sharp set of knives combined with fresh guards ensures a minimum need of cutting force which leads to lower fuel consumption and less wear on the platforms mechanical components.

 

Crop Lifters

Crop lifters ensure that laying crops are effectively picked up, increase the performance in down-crop situations and prevent damage to the cutterbar. Replace the crop lifters once they are bent or damaged.

 

Crop Lifter (3 Inch Guards System) 600R, 700PF, 600X, 700X AXE96494 AXE96494 incl. VAT*

Crop Lifter (3 Inch Guards System)

Part-No.: AXE96494 Model: 600R, 700PF, 600X, 700X
Guard System
3 Inch
Crop Lifter (4 Inch Guards System) 600F, RDF AH204936 AH204936 incl. VAT*

Crop Lifter (4 Inch Guards System)

Part-No.: AH204936 Model: 600F, RDF
Guard System
4 Inch Point Type
Blunt
Expert Tip

How many crop lifters do I need?

Quantity of crop lifters = width of platform - 1 (Example: A 30ft header can be equipped with 29 crop lifters)

Crop Lifter (4 Inch Guards System) 600D, 700D, 900D, 600D, RDF AH159210 AH159210 incl. VAT*

Crop Lifter (4 Inch Guards System)

Part-No.: AH159210 Model: 600D, 700D, 900D, 600D, RDF
Guard System
4 Inch Point Type
Long
Crop Lifter (4 Inch Guards System) HDX AXE84664 AXE84664 incl. VAT*

Crop Lifter (4 Inch Guards System)

Part-No.: AXE84664 Model: HDX

Also available as a kit. BXE11351 (5pcs) or BXE11350 (20pcs). Contact your dealer and profit of a reduced price.

Guard System
4 Inch Point Type
Long

More Information

Discover our Deere Website to learn more about our combine headers and platforms.

Explore now

Auger Finger Sets

Original John Deere Auger Fingers feature zone hardening and high elasticity so that they can withstand heavier stress levels without deforming or breaking. They improve feeding and enable higher harvesting speeds.

 

600R Auger Finger Set 600R AZ60037 AZ60037 incl. VAT*

600R Auger Finger Set

Part-No.: AZ60037 Model: 600R

Auger finger set for 600R platforms including 7 Fingers, Bearings, Pins, Strippers, Caps and Retainers.

Auger Platform Finger Set 600F/R/X/P, 700X AH214868 AH214868 incl. VAT*

Auger Platform Finger Set

Part-No.: AH214868 Model: 600F/R/X/P, 700X

Perfect for replacing broken fingers and stocking up your farm's workshop. Including 10 Fingers, Retainers and Pins.

Expert Tip

We also offer single parts!

Only one broken finger and no need to replace all of them with with a kit? You can also buy every single part individually, like bearings, retainers, fingers and more. Your dealer will provide you all parts that you

Draper Platform Finger Set 600D/FD, 700D/FD, RDF AXE21246 AXE21246 incl. VAT*

Draper Platform Finger Set

Part-No.: AXE21246 Model: 600D/FD, 700D/FD, RDF

Perfect for replacing broken fingers and stocking up your farm's workshop. Including 10 Fingers, Retainers and Pins.

For RDF and FD:
Outer Fingers
Draper Platform Finger Set 600D/FD, 700D/FD, RDF, HDX, HDF, HDR AH228229 AH228229 incl. VAT*

Draper Platform Finger Set

Part-No.: AH228229 Model: 600D/FD, 700D/FD, RDF, HDX, HDF, HDR

Perfect for replacing broken fingers and stocking up your farm's workshop. Including 10 Fingers, Retainers and Pins.

For RDF and FD:
Inner Fingers
Auger Flight Extension Kits 600R, 600X, 700X BXE10080 BXE10080 incl. VAT*

Auger Flight Extension Kits

Part-No.: BXE10080 Model: 600R, 600X, 700X

We recommend this extension kit when you have an uneven flow of material going into the machine.

More Information

Discover our Deere Website to learn more about our combine headers and platforms.

Explore now
exper tip icon
Expert Tip

Inspect Auger Fingers

Replace auger fingers when they are broken, missing or show excessive wear. Worn auger fingers cause poor feeding, reduce ground speed and increase the risk of internal auger damages which can result in high repair cost. John Deere auger fingers are hardened so they can handle heavy loads, stones an foreign objects to prevent such damages.

 

Reel Tines

Original reel tines gently deliver crop from the cutterbar to the platform auger. They are available in either plastic or spring steel.

 

Steel Tine 600R/X/F, 700X Z102299 Z102299 incl. VAT*

Steel Tine

Part-No.: Z102299 Model: 600R/X/F, 700X

Standart single steel tine

Composite Tine Kit 600R/X/D/FD, 700X/PF/D/FD, 900D, RDF, HDX, HDX, HDF KXE10423 KXE10423 incl. VAT*

Composite Tine Kit

Part-No.: KXE10423 Model: 600R/X/D/FD, 700X/PF/D/FD, 900D, RDF, HDX, HDX, HDF

Kit of composite reel tines. They improve feeding in short or down-crop and reduce crop wrapping and snagging.

Quantity
10 Also available:
Quantity: 60 - Part No. KXE10424 - Contact your dealer for further information
Expert Tip

Important!

Don’t forget to consult your dealer if you decide to change from steel tines to composite tines or vice versa, as additional parts might be required.

Bat Design Tine Kit - Bat Left 600R/F/FD/D, 700D, 900F/R/D AH166491 AH166491 incl. VAT*

Bat Design Tine Kit - Bat Left

Part-No.: AH166491 Model: 600R/F/FD/D, 700D, 900F/R/D

Kit of composite reel tines with a bat design which supports the crop flow and reduce losses.

Quantity
10
Bat Design Tine Kit - Full Bat 600R/F/FD/D, 700D, 900F/R/D AH166489 AH166489 incl. VAT*

Bat Design Tine Kit - Full Bat

Part-No.: AH166489 Model: 600R/F/FD/D, 700D, 900F/R/D

Kit of composite reel tines with a bat design which supports the crop flow and reduce losses.

Quantity
10 Also available:
Quantity: 130 - Part No. AH166493 - Contact your dealer for further information
Bat Design Tine Kit - Right Bat 600R/F/FD/D, 700D, 900F/R/D AH166490 AH166490 incl. VAT*

Bat Design Tine Kit - Right Bat

Part-No.: AH166490 Model: 600R/F/FD/D, 700D, 900F/R/D

Kit of composite reel tines with a bat design which supports the crop flow and reduce losses.

Quantity
10
Bat Design Tine Kit - No Bat 600R/F/FD/D, 700D, 900F/R/D KXE10477 KXE10477 incl. VAT*

Bat Design Tine Kit - No Bat

Part-No.: KXE10477 Model: 600R/F/FD/D, 700D, 900F/R/D

Kit of composite reel tines with a bat design which supports the crop flow and reduce losses.

Quantity
10
Outer Steel Tine Kit - Right 600R, 900R/F/D H201723 H201723 incl. VAT*

Outer Steel Tine Kit - Right

Part-No.: H201723 Model: 600R, 900R/F/D

In short crop, an Auxiliary Reel Tine on the outer side of the reel can help you keep your crop flow up and reliable.

Quantity
6
Outer Steel Tine Kit - Left 600R, 900R/F/D H201724 H201724 incl. VAT*

Outer Steel Tine Kit - Left

Part-No.: H201724 Model: 600R, 900R/F/D

In short crop, an Auxiliary Reel Tine on the outer side of the reel can help you keep your crop flow up and reliable.

Quantity
6
Auxiliary Composite Tine Kit 600X, 700X BXE11039 BXE11039 incl. VAT*

Auxiliary Composite Tine Kit

Part-No.: BXE11039 Model: 600X, 700X

In short crop, an Auxiliary Reel Tine on the outer side of the reel can help you keep your crop flow up and reliable.

Quantity
6
Auxiliary Composite Tine 600X/D/FD, 700X/D HXE28926 HXE28926 incl. VAT*

Auxiliary Composite Tine

Part-No.: HXE28926 Model: 600X/D/FD, 700X/D

In short crop, an Auxiliary Reel Tine on the outer side of the reel can help you keep your crop flow up and reliable.

Quantity
1

Discover our Deere Website to learn more about our combine headers and platforms.

Explore now
exper tip icon
Expert Tip

Know Your Tines: Steel vs. Composite

Steel tines reduce material buildup between the end of the reel and the crop divider, as there is more active material movement. They improve feeding in short or down-crop. Composite tines reduce crop wrapping and snagging. They can also increase uptime through a unique, high-strength, poly reel finger that provides 35 percent more stiffness.

 

Related Categories

Grain Processing

Grain Processing

New Products

New Products